Back to Manuals, Replacement Parts, Videos & Parts / DIY Repair Guides & Videos

How to Replace the Auger Motor

Replacing the auger motor requires partial disassembly of the hopper assembly. This process typically takes 45-60 minutes.

Replacement Steps

  1. Power off and unplug the grill completely before starting any work.
  2. Empty the hopper. You will need to tilt or remove the hopper to access the motor.
  3. Remove any screws or fasteners securing the hopper in place, then carefully tilt or lift the hopper to gain access to the motor.
  4. Disconnect the motor wiring from the controller, taking note of the wiring connections for reassembly.
  5. Remove the motor by unscrewing any mounting bolts or screws holding it in place.
  6. Install the new auger motor and secure it with the mounting screws.
  7. Reconnect the wiring to the new motor.
  8. Reassemble the hopper assembly and ensure everything is securely fastened.
  9. Power on the grill and run a short test to confirm that the auger motor is functioning correctly.
Always ensure the grill is powered off and unplugged before performing any maintenance.

Auger & Motor Replacement Videos

  • ZPG-200A Auger & Motor Replacement: Watch here
  • ZPG-450B Auger & Motor Replacement: Watch here
  • ZGRILL ZPG-550B2 New Design Auger Motor Replacement: Watch here
  • ZGRILL ZPG-600D2 New Design Auger Motor Replacement: Watch here
  • ZPG-10502B Auger & Motor Replacement: Watch here
  • 600 Series Auger & Motor Replacement: Watch here
  • Feeding Auger & Motor Replacement for 700 Series: Watch here
  • 700D4E Auger Motor Replacement: Watch here
  • ZPG-7002C & 7002C2E Auger & Motor Replacement: Watch here
  • 1000 Series Auger & Motor Replacement: Watch here
  • ZPG-11002B Auger & Motor Replacement: Watch here
  • ZPG-7052B Auger & Motor Replacement: Watch here